Precision Zener Reference Diode: Stable Voltage In Demanding Power Designs
A precision Zener reference is a tolerance grade: 33 mV at 1 % against 165 mV at 5 % on a 3.3 V rail. What that means for a 12-bit measurement.
A precision Zener reference is a tolerance grade: 33 mV at 1 % against 165 mV at 5 % on a 3.3 V rail. What that means for a 12-bit measurement.
A high-speed switching diode is specified by a 4 ns recovery at 10 mA and defined conditions, plus 1.5 pF of capacitance. What the test line decides.
A SOD-123 switching diode is a package choice: the same 100 V, 4 ns silicon comes in seven outlines. What the outline changes, and what it does not.
CAN bus ESD protection is a capacitance budget first: a two-line part must clamp 30 kV and still add only 25 pF per line. What the numbers decide.
Device ESD immunity is quoted to IEC 61000-4-2, vehicle testing to ISO 10605, and parts to AEC-Q101. What an automotive ESD suppressor must prove.
A multi-line ESD array is chosen by per-line capacitance and channel count, not by package size. What three real arrays specify, and where each one belongs.
An SOD-523 ESD protection diode is a transient voltage suppressor in the JEDEC SOD-523 (SC-79) surface-mount package, roughly 1.6 × 0.8 × 0.6 mm, that clamps electrostatic discharge and short spikes before they reach an IC. It protects because it switches from high impedance to a low-impedance avalanche path in under a nanosecond, shunting ESD … Read more
A Zener regulator is sized by its worst case, not its typical load. What a real low-power Zener specifies, and how the series resistor is chosen from those numbers.
A 600 W TVS diode is rated on a 10/1000 us pulse and only 350 W at 150 C junction. What the class covers, and the three rows that cause surprises.
A 1500 W TVS diode is rated in power but chosen in joules: about 1.5 J per pulse, against a load dump worth hundreds. What the class really covers.
A low capacitance ESD diode keeps 3.5 pF off a high-speed line. Why 45 pF parts are wrong there, and how capacitance, clamping and IEC levels decide.
A USB ESD protection diode diverts a short electrostatic-discharge transient away from vulnerable circuitry while adding as little loading as practical to the normal signal. Selection depends on the protected pin: high-speed data, configuration, sideband and power pins have different voltage and signal-integrity requirements. A diode rating alone does not prove that the finished port … Read more
Send the topology, current and voltage class. Good-Ark sales and application engineering will confirm the closest device, package and qualification status.