James

AWSS10H100 appears in the Good-Ark new-release table as a 10 A, 100 V Schottky rectifier in eSGC (TO-277). This part occupies the 10 A, 100 V corner of the four-part AWSS comparison. A substitution review must explain which original constraint needs that combination. Last updated: October 16, 2026 Record the reason for changing both ratings … Read more

The AMBRB3045CT is a 30 A, 45 V common-cathode Schottky dual diode in a D2PAK package from Good-Ark, with 0.64 V typical forward drop per die at 15 A and a 200 A per-die surge rating. It targets dashboard power, SMPS output stages, and OR-ing roles where 30 A of board-level rectification needs a low … Read more

The dashboard cluster’s power stage is a budget-driven design: the displays, audio, and logic each draw current, and the AMBRB3045CT—a 30 A, 45 V common-cathode Schottky in D2PAK—serves the buck outputs and the OR-ing roles. This guide covers the budget, the topology, the loss and thermal verification, and the production notes. Last updated: October 16, … Read more

AWSS5H60 appears in the Good-Ark new-release table as a 5 A, 60 V Schottky rectifier in eSGC (TO-277). Its useful starting point is a load whose forward-current and reverse-voltage requirements can fit the smaller family classes. This review separates the current budget from the package label. Last updated: October 16, 2026 Build the current budget … Read more

The AMBR40250S is a 40 A, 250 V Schottky barrier rectifier in a TO-220AB package from Good-Ark, with a maximum forward drop of 0.90 V at 20 A, a 180 A surge rating, and 2.0 °C/W junction-to-case resistance. It belongs in soft-switched power stages where the actual reverse peak stays inside its 250 V class … Read more

A Schottky has no PN-junction minority-carrier storage, so it has essentially no PN-style reverse recovery and can win in hard-switched stages when its voltage, leakage, capacitance, surge, and thermal gates close; the fast recovery diode becomes the alternative when one gate fails. This article turns that comparison into a fillable loss worksheet for a 250 … Read more

The AMBRB30200CT is a 30 A, 200 V common-cathode Schottky dual diode in a D2PAK package from Good-Ark, with 0.84 V typical forward drop per die at 15 A and a 200 A per-die surge rating. It targets the 200 V-class secondary side of OBC and server DC-DC stages, where the reflected voltage fits with … Read more

The ASGC051BS is a 5 A, 100 V Schottky barrier rectifier in a TO-277B package from Good-Ark, carrying AEC-Q101 qualification, MSL 1 moisture sensitivity, and a low-leakage profile that suits BMS and BCM control boards. This article covers the rating set, the package value, the application fit, and the qualification highlights. Last updated: October 11, … Read more

The D2PAK’s 200 V, 30 A class is a thermal design first: the loss at the working temperature, the copper and via path, and the case-temperature measurement decide the real capability. This guide covers the heat-flow route, the loss budget, the measurement, and the design review. Last updated: October 11, 2026 The D2PAK Thermal Path … Read more

The reverse-polarity diode in a BMS pays its forward drop on every operating hour, and the loss—0.5 V at 5 A is 2.5 W—is the trade against the ideal-diode MOSFET’s complexity. This guide answers the single decision—diode or ideal-diode MOSFET—with the losses, the control cost, and the ASGC051BS design-in. Last updated: October 11, 2026 The … Read more

The AMBRP5100 is a 5 A, 100 V Schottky barrier rectifier in a PDFN56 package from Good-Ark, with 0.70 V typical forward drop at 5 A, a 120 A surge rating, and 3 °C/W junction-to-case resistance. It targets T-BOX, lighting-control, and SMPS output boards where a compact 5 A rectifier carries the load. Last updated: … Read more