Selection guides, application notes and design checks for rectifiers, Schottky diodes, TVS protection, MOSFETs, SiC and IGBTs — written for engineers and sourcing teams.
Appliances run for a decade on cost-sensitive power stages, and the rectifier choice is a balance: the general-purpose class wins where the voltage, frequency, and loss budget allow, and the upgrade families earn their cost where they do not. This guide covers the boundary, the standby story, the reliability expectation, and a worked example. Cost-Sensitive … Read more
An LED driver regulates current, not voltage, and that changes the rectifier’s loss story: the current is fixed by the LED string, so the forward drop multiplies directly into watts. This guide covers the constant-current logic, the topologies, the 350 mA–3 A selection, and the compact high-temperature fit of the ASGC051BS. Constant-Current Outputs Change the … Read more
Gallium-nitride switches shrank the primary side of USB-PD chargers, but the output stage still turns on a silicon Schottky: at 5–20 V and a few amps, the forward drop is the loss, the PDFN56 package is the heat path, and synchronous rectification is the only serious competitor. This guide walks the PPS load profile, the … Read more
A telematics box is always on: its standby power is counted in milliwatts and its wake-up communication bursts in amps, and the rectifier sits in both regimes. This guide covers the quiescent budget, the burst loads, the AMBRP5100 fit, and the leakage value in always-on circuits. Always-On Power: The Quiescent Current Budget The T-BOX draws … Read more
Doorbells, landscape lighting, and IoT devices run on 12/24 V AC, and at those voltages the bridge’s forward drop is a big fraction of the rail—which is exactly where the Schottky bridge shines. This guide covers the low-voltage AC world, the drop value, the MB series, and a worked example. The Low-Voltage AC Input World: … Read more
Aircraft AC distribution runs at 400 Hz, and the frequency changes the rectifier’s loss story: the recovery event repeats at every half-cycle, so the bridge choice is decided by the loss estimate, the harmonics, and the validation. This guide covers the 400 Hz world, the frequency-and-loss relationship, the bridge family decision, and the thermal and … Read more
An industrial motor drive rectifies a three-phase grid that is not clean: voltage dips, surges, and harmonics are the norm, and the input bridge must survive them. This guide covers the harsh-grid reality, the three-phase bridge role, the surge and fusing design, and the sizing for 2.2–15 kW drives. Industrial Input Stage: The Harsh Grid … Read more
Instrument clusters are the most ripple-sensitive electronics in the car: display noise, audio artifacts, and sensor jitter all trace back to the power rails. This guide covers the power stage architecture, the low-VF dual-diode roles, the EMI and layout discipline, and the interior thermal environment. Why Cluster Electronics Hate Ripple The cluster’s displays, backlights, and … Read more
A BMS or BCM board protects itself and its loads against four failures: reverse connection, load transients, freewheeling spikes, and line overvoltage. Each path needs a different component, and the compact TO-277B package is the common thread. This guide enumerates the paths and matches each to its protection part. BMS and BCM Power Paths: What … Read more
The AWSS10H100 is a 10 A, 100 V Schottky barrier rectifier in an eSGC (TO-277) package from Good-Ark, positioned on the Good-Ark site for automotive lighting and ECU power. It is the top of the AWSS current and voltage grid, and its full electrical specifications are confirmed with the supplier. This article covers the positioning, … Read more
The 12 V ECU input protection is a three-layer chain: the TVS clamps the transient, the rectifier blocks the wrong polarity and the residual, and the filter absorbs what passes. This guide covers the threat model, the division of labor, the placement, the clamping budget, and the validation. The Threat Model for ECU Inputs The … Read more
The AMBRB3045CT is a 30 A, 45 V common-cathode Schottky dual diode in a D2PAK package from Good-Ark, with 0.64 V typical forward drop per die at 15 A and a 200 A per-die surge rating. It targets dashboard power, SMPS output stages, and OR-ing roles where 30 A of board-level rectification needs a low … Read more
Send the topology, current and voltage class. Good-Ark sales and application engineering will confirm the closest device, package and qualification status.